Having Trouble with Your Pod System? Here’s How to Fix Them

There are a large number of prefilled and refillable pod systems to choose from.While the range of products may seem overwhelming at first, the good news is that your choice of device hardly matters, as the pod system is one of the most reliable vaping products on the market.As long as you’re happy with the flavor — and the level of diversity in the vape juice world has never been greater — you’re likely to have a great experience.

 

However, as reliable as today’s vaping devices are, there’s always a chance you’ll end up with a problem with your pod system – and that’s where this article will help.We’ll provide simple steps to solve all the most common problems you may have with your pod vaping system.let us begin!

 

How to Fix a Pod System Not Charging?

 

If your pod system isn’t charging, the first thing you should look at is the device you’re using to charge it.For example, you shouldn’t use a wall adapter for your phone or tablet to charge your vaping device.

 

Tablets and smartphones are designed for high-speed charging.

 

With this feature, a completely dead phone can be restored to a usable state after a few minutes on the charger.However, vaping devices are not compatible with fast charging and can overheat when connected to a high-speed charger.You should always charge your vaping device by connecting it to your computer.

 

If your pod system is already connected to your computer and still not charging, the next thing you should do is replace the USB cable.When USB charging cables are used multiple times a day, they tend to wear out quickly.Eventually, the internal connections of the wires start to break.If this happens to the charging cable that came with your pod system, your device may refuse to charge or only occasionally charge.Replacing the cable should fix the problem.

 

How to Fix a Non-functioning Pod System?

 

If your pod system doesn’t hit when you blow or press the ignition button, the first thing you should do is make sure the battery is fully charged.If the battery is dead, the device will not work.

The device’s light may also flash when you try to use the e-cigarette.If your pod system has a manual start button, it most likely has an on/off function.In this case, try pressing the boot button five times to turn on the device.

 

If your pod system is still not working, try removing the pod and looking under it.Did you see a pool of e-liquids? If this is the case, the pod has leaked.When this happens, the e-liquid can contaminate the device’s internal electronics – which can cause your pod system to stop working entirely.

 

However, even if the inside of the device is not damaged, the e-liquid prevents the cartridge from establishing a good electrical connection to the device.Remove the e-liquid with a cotton swab or paper towel.If you are using a pre-populated pod, try connecting another pod that is not leaked.If your pod system is still not hitting, remove the pod and blow hard through the device to remove as much excess e-liquid as possible.If the device still doesn’t work, try sealing it in a bag of dry rice for a day.

 

How to Fix a Leaking or Rattling Pod System?

 

Depending on whether the equipment uses prefilled or refillable containers, the methods for repairing leaking container systems vary slightly.If your device has a prefilled cartridge, the most likely cause of the leak is that you smoked too hard, or you received a rare cartridge with a manufacturing defect.With any small vaping device, it is important to puff lightly when vaping, as puffing too hard can cause the e-liquid to be drawn out of the cartridge’s reservoir, flooding the coil and eventually causing a leak or rattle.When you use an e-cigarette, you should use the minimum air pressure required for the device to start producing vapor.If you have a refillable pod system, the need to inhale lightly when you vape also applies – but with refillable systems, there is another factor to consider, since you are filling smoke bomb man.

 

Refillable pods are usually sealed with a silicone stopper that takes up a small amount of space inside the pod.For this reason, it is very important to leave a little air space each time the pod is refilled.Otherwise, the plug will push the e-liquid out of the pod’s reservoir, flooding the coil.

 

How to Fix Weak Hits Using the Pod System?

 

One of the best things about using a pod vaping system is that you can generally expect to get a strong, satisfying blow every time you use it.If your device is giving you a weak blow, the first thing you should check is the nicotine strength of your e-liquid or pod.

 

Many popular pre-filled pod systems are very compact devices that produce small clouds of vapor.For such a small device, it’s important to use a pod with a high nicotine strength – so if you’re getting weaker hits, choose the highest strength available.

 

If you are already using the highest nicotine concentration available for your pod system, you should consider that the device you are using may not be right for you.Refillable devices typically generate larger vapor clouds than prefilled pod systems.If you switch to a device with a higher level of vapor production, you can get a more satisfying vaping experience without changing the nicotine strength of the e-liquid.

 

The above introduces the common problems of pod systems and how to fix them.If you want to buy a new pod system or other types of electronic cigarettes, please contact us.

 

Bestone is a professional custom electronic cigarette manufacturer.Our R&D team is only for high-tech and professional research fields.All our products are ISO9001:2000, RoHS, CE, FDA, PSE, UL, and SGS certified.We faithfully implement the ISO9001:2000 system and rely on our rich engineering advantages to ensure that every product meets international standards.