Specific Matters for Maintaining Atomized Electronic Cigarettes

 

Atomized electronic cigarettes are becoming more and more popular in the market, and more and more people are beginning to use electronic cigarettes to assist smoking cessation.But even so, there are still many e-cigarette users who still do not know how to maintain the e-cigarette and prolong its service life.

 

In fact, the maintenance of electronic cigarettes is still very important, because doing a good job in the maintenance of electronic cigarettes can ensure that the overall quality of the taste of electronic cigarettes does not decline.The following has sorted out the specific matters of maintaining the atomized electronic cigarette for you.

 

Battery care

 

The maintenance of the battery is more important because the electronic cigarette battery is a major component of the entire atomizing rod.Usually, most of the electronic cigarettes on the market use lithium batteries.

Lithium batteries are taboo to charge for a long time.Charging the electronic cigarette for a long time will cause damage to the lithium battery.It is easy to cause the battery not to be charged normally, or only to charge into the virtual power, which affects the normal use of the electronic cigarette.

 

So try to charge the battery after running out of power, charge it once, do not cut off the power halfway, take out the battery within half an hour after it is fully charged.In addition, lithium batteries are also taboo to use while charging.

The electronic cigarette heats the e-liquid through the heating core, and the temperature generated by the heating core is relatively high.If you use it while charging, it is easy to cause the battery temperature to be too high, which will accelerate the loss of the battery and reduce the service life of the electronic cigarette.

 

Atomizing core

 

The core of the atomizer lies in the atomizing core, which is composed of resistors, oil guide ropes, and some accessories.The most common problem with atomizers is that they produce a burnt smell.The reason is that the resistance heating will burn the oil guide rope.

Therefore, in the process of use, pay attention to the remaining amount of e-liquid and do not dry it.It is necessary to keep the e-liquid in the cartridge not less than 1/3, so that the atomizing core can be completely wrapped in e-liquid, so as to ensure the best atomization effect of the electronic cigarette.

 

There are still many users who will care about whether the odor will be caused when the atomizer replaces the e-liquid.The actual test shows that as long as there is not too much e-liquid mixed in the warehouse, even if the finished atomizing core is not replaced, only a few puffs of smoke will be mixed with flavor after replacing the e-liquid.For cleaning when replacing the e-liquid, you can clean the e-liquid in the atomizer bin, and if conditions permit, you can directly replace the atomizing core.

 

During the use of the atomizer, it is inevitable that condensate will accumulate or leak.Even if these liquids are handled, the damage to the host can be effectively avoided.If not dealt with in time, the condensate will corrode the screws and other metal parts on the top of the host, and even for some hosts without electrode leakage protection, the liquid may flow into the host, causing greater damage to the host.

 

The use of the atomizer will inevitably generate condensate.Generally speaking, the condensate will accumulate on the top of the silo and the flue part of the atomizer.

 

Using the oil drop atomizer, you can pull out the atomization chamber at any time and use a paper towel or facial wipe.However, the dismantling of the finished atomizer is not as simple as that of the oil drop atomizer.You can use a method like throwing a thermometer, the condensate in the flue and the silo is thrown down.

 

If the condensate accumulates too much and cannot be cleaned up in time during the use of the atomizer, there is a possibility that the condensate will be sucked into the mouth.Many users say that the electronic cigarette will be inhaled after a period of time, making the mouth sweet.something, it is likely that it has absorbed condensate.

 

At the same time, too much condensate falls on the atomizing core, which will cause problems such as discoloration of cotton, carbon deposition on the coil and oil frying, etc., which will affect the service life of the atomizing core.

 

When using an atomizer, it is recommended to disassemble and clean the atomizer every time one or two tanks of e-liquid are drawn.When cleaning, it is necessary to pay attention to cleaning the condensate in the atomization chamber and the flue.At the same time, the finished atomizer with air intake at the bottom should also pay attention to cleaning the liquid in the atomizer base.

 

The cleaning method can be selected according to the actual situation.The easiest way is to use a paper towel or cotton cloth to wipe it.Or rinse it with water and then wipe it.It should be noted that the finished core cannot be rinsed with water.At the same time, pay attention to other parts that need to be wiped dry after cleaning or dried by a hairdryer.

 

After reasonable cleaning and maintenance, the atomizer can be guaranteed to look clean and new for a long time, and the user experience is as good as the first one.At the same time, during intermittent use, there will be no peculiar smell in the atomizer, which ensures that the taste performance of the atomizer will not be affected.To sum up, if e-cigarette users can increase the maintenance of e-cigarettes in the above two aspects, the service life of e-cigarettes can be extended to a great extent.

 

As a manufacturer of electronic cigarette products with many years of experience, we always prioritize the needs of our customers and constantly control the quality of our products.We have a professional production team and strict quality inspection system, and we carry out comprehensive quality control from product design to export.At the same time, we will also provide thoughtful solutions and professional one-stop shopping services according to the actual needs of users.If you want to buy our e-cigarettes, please contact us immediately!

 

Shenzhen Bestone Technology Co., Ltd. is a global leader in offering vaping OEM/ODM solutions with cutting-edge R&D technology, massive manufacturing capacity, wide range of product’s portfolio and diverse client base.All our products are ISO9001:2000, RoHS, CE, FDA, PSE, UL, and SGS certified.With a decade of OEM/ODM experience for top vaping brands, BESTONE has developed unique heating technology as well as structure, material and design solution to revolutionize the e-cig industry.